Correcting the water damage in your bathroom is usually a time consuming task depending on the severity of it, but the prevention of such damage is usually within the reach of most homeowners. The fact is that preventing this damage is usually much, much easier than the act of having to actually repair it after it has already occurred. Steam from showers and baths can discolor ceilings and cause mold growth, overflowing toilets onto cracked tile can lead to rotting of the floor underneath it, and there is always the possibility of mold growth. You should do what you can to protect this room in your home, since it is one of the most important rooms along with the kitchen.
There are a few different areas of your bathroom that you need to keep an eye on and look for any sign of abnormalities in on a regular basis. These areas that are the most at risk are the toilet, shower, bath tub, and the sink.
The bath tub and shower usually require some special attention, since these are the largest sources of water in the room and present the most risk. Over time, the tiles around the tub and shower can become cracked and if it is allowed to overflow, the floor underneath can become so damaged that the whole floor will need to be taken up and redone. Missing grout can also cause this. Repair the tile floor as soon as you notice cracks in it. Also make sure that the caulking around the tub is not loose or missing and if it is, you should re-caulk this yourself or have a professional do it for you.
Check the plumbing underneath the sink and make sure that there are no leaks. Loose seals in this plumbing should be replaced as soon as possible, as well.
The toilet can also overflow and the tile around this area can also be breached if it is cracked, so in the same manner as the area around the tub, the cracked tile needs to be dealt with. Keep your toilet from overflowing by not putting more paper in the toilet than it can handle. A lid lock can be purchased and put on toilets in homes that have small children that are prone to putting things in the toilet that do not belong there.
If you can see signs of moisture on the drywall, then you might also have a problem in the plumbing running through the walls. You need to call in a professional to deal with this problem.
Showing posts with label Flooded Carpets. Show all posts
Showing posts with label Flooded Carpets. Show all posts
Thursday, January 31, 2008
Which Flooded Items You Can Salvage
After your home has been flooded, you might walk around it after the waters have receded and wonder to yourself just what you need to try to save and what you need to get rid of pretty quickly, since you know that contaminated items left in the home can infect everything else.
One of the first things that you need to know is that porous items, especially those that have a lot of padding, will need to be thrown away. This is because they need to be completely dried out so that mold does not start to grow in them and because these items can be difficult to disinfect, since padding makes it difficult for the disinfectant to get through the entire depth of it. This means that any bed or décor pillows will need to be thrown out, as well as any stuffed animals that you have for your children.
It will also be very hard to save upholstered furniture. The dirt, silt, and chemicals often found in flood waters will get past the outer fabric fairly easily if the item is in the water for more than a couple of hours and the padding inside will soak up quite a bit of it.
Saving your curtains and other fabric items that are exposed like this depends on how much damage was done to them. The dyes in the fabric may have bled or it may have become stained from being left in the water for so long.
Items like table cloths and towels can be saved if they are washed a few times in enough disinfectant, but even items that have not come into contact with the flood water can become molded after a few days if they are left in the house, due to the high humidity.
Any electric blankets that you may have that were exposed to the flood water will need to be completely thrown away. These items could possibly have wiring damage and can malfunction if you try to use them. They are in no way safe to continue using after being submerged in water.
Blankets can be washed, but you will need to do this a few times in hot water. Chlorine bleach can sanitize these items, but you will need to be careful what you use it on, since the dyes may run on some items. Try to find a laundry detergent that disinfects, as well. Borax detergent can be helpful in killing mold.
Wooden items that have had their finishes breached by flood waters may be contaminated and will need to be disinfected thoroughly.
One of the first things that you need to know is that porous items, especially those that have a lot of padding, will need to be thrown away. This is because they need to be completely dried out so that mold does not start to grow in them and because these items can be difficult to disinfect, since padding makes it difficult for the disinfectant to get through the entire depth of it. This means that any bed or décor pillows will need to be thrown out, as well as any stuffed animals that you have for your children.
It will also be very hard to save upholstered furniture. The dirt, silt, and chemicals often found in flood waters will get past the outer fabric fairly easily if the item is in the water for more than a couple of hours and the padding inside will soak up quite a bit of it.
Saving your curtains and other fabric items that are exposed like this depends on how much damage was done to them. The dyes in the fabric may have bled or it may have become stained from being left in the water for so long.
Items like table cloths and towels can be saved if they are washed a few times in enough disinfectant, but even items that have not come into contact with the flood water can become molded after a few days if they are left in the house, due to the high humidity.
Any electric blankets that you may have that were exposed to the flood water will need to be completely thrown away. These items could possibly have wiring damage and can malfunction if you try to use them. They are in no way safe to continue using after being submerged in water.
Blankets can be washed, but you will need to do this a few times in hot water. Chlorine bleach can sanitize these items, but you will need to be careful what you use it on, since the dyes may run on some items. Try to find a laundry detergent that disinfects, as well. Borax detergent can be helpful in killing mold.
Wooden items that have had their finishes breached by flood waters may be contaminated and will need to be disinfected thoroughly.
Wednesday, September 12, 2007
Dealing With Flooded Carpets
If your home is flooded, then odds are pretty good that your carpet is going to need to be taken up. Sewage, chemicals, and other biohazards live in the dirty flood water that took over your home during that time and most of the time, porous materials such as carpet cannot practically be saved. You can go through a lot of trouble trying to save your old carpet when the most efficient thing to do is just to throw it out.
Trying to shampoo the carpet itself may work and remove a lot of the smell and stains, but the carpet padding underneath will need to be completely taken out and replaced. Foam padding like this cannot be cleaned and will usually end up shredding if you try, so whether you choose to clean the carpet or just replace it, it will still need to come up.
Removing your carpet is not a difficult task. You must remove all furniture from the room first and depending on whether you want to save the carpet or just replace it, you can take a utility knife and cut it in areas that may be difficult to take up. You can also use it to cut the old carpet into strips if you do not want to save it. Pull the moldings on the walls around the room off and take the door off its hinges. Removing the door will help you get the old carpet out and the new carpet in. The carpet padding also needs to be removed.
Pulling the old tackless strips up and installing new ones may be a good idea and you need to leave about half an inch of space between the new strips and the wall. The tips of the tacks need to be facing toward the wall.
If the floor has had much mold or sewage damage to it, you will want to clean this up before installing new carpet or re-installing your clean old carpet. Cleaning up mold stains can be done by putting 5 tablespoons of trisodium phosphate in a single gallon of water and scrubbing the floor with something that will not scar it.
If you cannot afford new carpet or to have the old carpet cleaned, refinishing the hardwood floor that may be underneath it may be an option. If you had to take carpet out of the bathroom, laundry room, basement, or kitchen, then you will really want to avoid putting carpet back into these areas, since these rooms of the house tend to stay damp.
water damage Restoration Contractor
Austin Water Damage Restoration
Black Mold Removal From Drywall
Trying to shampoo the carpet itself may work and remove a lot of the smell and stains, but the carpet padding underneath will need to be completely taken out and replaced. Foam padding like this cannot be cleaned and will usually end up shredding if you try, so whether you choose to clean the carpet or just replace it, it will still need to come up.
Removing your carpet is not a difficult task. You must remove all furniture from the room first and depending on whether you want to save the carpet or just replace it, you can take a utility knife and cut it in areas that may be difficult to take up. You can also use it to cut the old carpet into strips if you do not want to save it. Pull the moldings on the walls around the room off and take the door off its hinges. Removing the door will help you get the old carpet out and the new carpet in. The carpet padding also needs to be removed.
Pulling the old tackless strips up and installing new ones may be a good idea and you need to leave about half an inch of space between the new strips and the wall. The tips of the tacks need to be facing toward the wall.
If the floor has had much mold or sewage damage to it, you will want to clean this up before installing new carpet or re-installing your clean old carpet. Cleaning up mold stains can be done by putting 5 tablespoons of trisodium phosphate in a single gallon of water and scrubbing the floor with something that will not scar it.
If you cannot afford new carpet or to have the old carpet cleaned, refinishing the hardwood floor that may be underneath it may be an option. If you had to take carpet out of the bathroom, laundry room, basement, or kitchen, then you will really want to avoid putting carpet back into these areas, since these rooms of the house tend to stay damp.
water damage Restoration Contractor
Austin Water Damage Restoration
Black Mold Removal From Drywall
Subscribe to:
Posts (Atom)
